INKOMA SHG ngangkat screw jack gancang dipikawanoh pikeun kinerja dinamis sarta durability, sahingga hiji pilihan luhur pikeun konsumén anu butuh efisiensi tinggi na hirup layanan panjang. Sadia dina opat ukuran, éta nyertakeun rentang beban tina 1,5 t nepi ka 9 t sarta idéal pikeun aplikasi merlukeun loading dinamis tinggi jeung siklus tugas nambahan.
Fitur:
- Kamampuh ngangkat: 15 kN ka 90 kN
- Speed Drive: Input speeds nepi ka 3000 rpm
- Tipe Screw: Self-locking trapezoidal screw (opsional ball screw sadia)
- Lubrication: sirkuit lubrication misah pikeun pagelaran hadé
- Mesin screw kalawan grease lubrication
- Gears Bevel kalayan pelumasan mandi minyak
- Babandingan Bevel Gear: Sadia dina babandingan 2:1 jeung 3:1
- Durability: Case-hardened jeung taneuh bevel gears na shafts
- Efisiensi: Heliks spiral huntu bevel gears nyadiakeun speeds ngangkat tinggi, efisiensi alus teuing, sarta hirup layanan panjang
Runtuyan INKOMA SHG nawarkeun kombinasi sampurna tina speed, durability, sarta kinerja dinamis, sahingga cocog pikeun industri dimana efisiensi tinggi na sering pamakéan anu diperlukeun.
| Ukuran (SHG) | 15 | 25 | 50 | 90 | |
| Max. ngangkat kapasitas dinamis / statik | [kN] | 15 | 25 | 50 | 90 |
| Max. beban tensile dinamis / statik | [kN] | 15 | 25 | 50 | 90 |
| Screw Tr | 24×5 | 35×8 | 40×7 | 60×9 | |
| Babandingan N | 2:1 | ||||
| Angkat per révolusi pikeun rasio N | [mm/per rév.] | 2.5 | 4 | 3.5 | 4.5 |
| Babandingan L | 3:1 | ||||
| Angkat per révolusi pikeun rasio L | [mm/per rév.] | 1.66 | 2.67 | 2.33 | 3 |
| Max. kapasitas drive2) dina T = 20 °C Siklus tugas (ED) 20 %/jam | [kW] | 1 | 1.5 | 2.4 | 8.9 |
| Max. kapasitas drive2) dina T = 20 °C Siklus tugas (ED) 10 %/jam | [kW] | 1.3 | 2.6 | 3.8 | 13 |
| rating efisiensi screw | [%] | 41 | 43 | 37 | 33 |
| Torsi screw dina kakuatan max.lifting | [Nm] | 29.4 | 73.2 | 123.4 | 398.5 |
| Max.diijinkeun drive-aci torsi | [Nm] | 50 | 125 | 175 | 1600 |
| Momen massa inersia J Rasio N tipe 1 | [kg cm2] | 1.058 | 6.63 | 22.44 | 181.28 |
| Momen massa inersia J Rasio N tipe 2 | [kg cm2] | 1.079 | 6.79 | 22.89 | 184.92 |
| Momen massa inersia J Rasio L tipe 1 | [kg cm2] | 0,677 | 3.6 | 7.248 | 123.79 |
| Momen massa inersia J Rasio L tipe 2 | [kg cm2] | 0,691 | 3.67 | 7.393 | 126.28 |
| Bahan perumahan | EN-GJL-250 | G-AlSi10 Mg | EN-GJL-250 | ||
| Beurat tanpa panjang stroke jeung tabung panyalindungan | [kg] | 9 | 13.5 | 23 | 85 |
| beurat screw per 100 mm stroke | [kg] | 0.8 | 0.59 | 1.5 | 2.5 |
| Jumlah pelumas dina gear cacing | [kg] | 0.15 | 0.9 | 0.6 | 3.5 |
